EPOXY PAINT

For metal application

  • EPOXY PRIMER RED OXIDE (2000 SERIES)
    Red oxide epoxy primer to be used on steel for anti-corrosive effect

  • EPOXY ZINC RICH PRIMER (2003 SERIES)
    Zinc rich primer to be used in severe corrosive environment. It confers the best resistance to corrosion of any types of paint, usually used as 3-part system for marine environment.

  • PASTEL EPOXY ZINC PHOSPHATE PRIMER GREY (2008 SERIES)
    High quality primer containing Zinc Phosphate anti-corrosive agent and MiOx oxygen barrier agent. For use on all types of steel.
  • EPOXY ENAMEL FOR STEEL (2010 SERIES)
    Epoxy topcoat to be used for steel structures over suitable primer. Mainly used for interior structures not exposed to direct sunlight and UV.

EPOXY PAINT

For Floor and other materials application

  • EPOXY MOISTURE RESISTANT PRIMER CLEAR (3902 SERIES)
    Moisture resistant primer to be applied before topcoat and especially on damp and humid surfaces.

  • EPOXY ENAMEL FOR FLOOR (2910 SERIES)
    Solvent based Epoxy topcoat to be applied over primed surfaces

  • EPOXY HIGH SOLID HEAVY DUTY FOR FLOOR (3910 SERIES)
    High solid Epoxy coating for heavy duty application such as industrial areas, high traffic car parks.

  • EPOXY PRIMER SOLVENT FREE (2002SF SERIES)
    Solvent free primer for application where strict VOC regulations are required or in poorly ventilated areas.

     

  • EPOXY ENAMEL SOLVENT FREE (3910SF SERIES)
    Epoxy topcoat for heavy duty application where strict VOC regulations are required or in poorly ventilated areas. Thickness up to 1 mm can obtained in 1 coat.

  • EPOXY SOLVENT FREE FOOD GRADE. (2392 SERIES)
    Food grade epoxy coating for use in food factories and kitchens. Its FDA approved raw materials are suitable for use in food production areas. Not intended to be used as direct food contact paint.

  • EPOXY SKRID (2310S SERIES)
    Pastel Epoxy skrid is used for isolation and abrasion resistance. It is durable and chemical resistant. It is specialized by barrier properties against moisture and vapor. Ideal for floors constantly subjected to wet conditions

  • EPOXY SOLVENT FREE SELF-LEVELING (2310SL SERIES)
    Epoxy SELF-LEVELLING is applied indoor as a self-leveling coating and suitable for 3D EFFECT clear coating. It is applied to substrates such as concrete and over painted surfaces.
  • TWO-PACK EPOXY PUTTY (057 SERIES)
    Epoxy based putty designed to be applied under epoxy Enamel topcoat where the substrate needs heavy fixing such as potholes, cracks in the concrete…
  • LIQUID TWO-PACK EPOXY PUTTY (060 SERIES)
    Pastel Liquid Epoxy Putty is intended to repair superficial and hairline cracks in reinforced concrete. The low viscosity of the product allows it to be applied by roller or trowel, it then penetrates the cracks and hardens to form a strong joint
  • EPOXY THINNER (23 SERIES)
    Slow evaporating thinner with no glycols, does not affect epoxy gloss and pot life, allows ample time for epoxy to dry in a uniform fashion.
  • COAL TAR EPOXY (2098 SERIES)
    Coal tar epoxy to be used in areas with highly corrosive agents such as acids and alkalis, principal areas of use is underground wastewater facilities
  • EPOXY MASTIC COATING (2410 SERIES)
    Epoxy Mastic Coating is used where good surface preparation is not possible it has excellent adhesion to previously painted surfaces and even poorly prepared surfaces.